Product name: variable valve timing solenoid valve
Manufacturer Part Number: 11367585425
Interchangeable part numbers: 917-241,11367516293
Replacement number: 917-241,11367516293; 11367585425; 2T1046; 590-1032; 7V9018; 917241; SK917241; TS1046; VTS1017; VV1107; VVS177; VVT207
error code
When the failure of the factory VCT solenoid valve will cause poor fuel economy, your vehicle will throw out Check Engine Light CEL code 2A87, 2A82, 2A9A, 2A9B, P0016 or P0017. Solve your problems and restore the driving performance of the vehicle.
Quality assurance
100% brand new. Reasonable price with OEM quality can save you hundreds of dollars in car dealership expenses
1 year warranty
All HISPORT products have a 1-year warranty. For any questions about this product, you can send an email as soon as possible. We will provide you with quality customer service.
OBD-II fault code
The OBD-II fault code caused will point to the faulty parts, such as P0010 (intake side circuit failure), P0011 (intake side actuator solenoid valve timing too high), P0013 (exhaust side actuator solenoid valve timing too high) P0014 (Exhaust side actuator solenoid valve timing is too high). advanced).
Vehicle accessories
BMW 1 Series M 3.0L l6 2011
BMW 128i 3.0L l6 2008 2009 2010 2011 2012 2013
BMW 135i 3.0L l6 2008 2009 2010 2011 2012 2013
BMW 323i 2.5L l6 2000
BMW 325i 2.5L l6 2001 2002 2003 2004 2005
BMW 325i 3.0L l6 2006
BMW 325xi 2.5L l6 2001 2002 2003 2004 2005
BMW 325xi 3.0L l6 2006
BMW 328i 2.0L l4 2012 2013
BMW 328i 2.8L l6 2000
BMW 328i 3.0L l6 2007 2008 2009 2010 2011 2012 2013
BMW 328xi 3.0L l6 2007 2008
BMW 330i 3.0L l6 2001 2002 2003 2004 2005 2006
BMW 330xi 3.0L l6 2001 2002 2003 2004 2005 2006
BMW 335i 3.0L l6 2007 2008 2009 2010 2011 2012 2013
BMW 335is 3.0L l6 2011 2012 2013
BMW 335xi 3.0L l6 2007 2008
BMW 525i 2.5L l6 2001 2002 2003 2004 2005
BMW 525i 3.0L l6 2006 2007
BMW 525xi 3.0L l6 2006 2007
BMW 528i 2.0L l4 2012 2013
BMW 528i 2.8L l6 2000
BMW 528i 3.0L l6 2008 2009 2010 2011
BMW 528xi 3.0L l6 2008
BMW 530i 3.0L l6 2001 2002 2003 2004 2005 2006 2007
BMW 530xi 3.0L l6 2006 2007
BMW 535i 3.0L l6 2008 2009 2010 2011 2012 2013
BMW 535xi 3.0L l6 2008
BMW 740i 3.0L l6 2011 2012 2013
BMW 740Li 3.0L l6 2011 2012 2013
BMW X3 2.0L L4 2013
BMW X3 3.0L l6 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013
BMW X5 3.0L l6 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013
BMW X6 3.0L l6 2008 2009 2010 2011 2012 2013
BMW Z4 3.0L l6 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012
installation
Loosen the metal screw clips on the throttle body and air cleaner air intake pipe to remove the top of the plastic engine air intake.
Remove the oil cap and pull down the plastic cap.
Remove the two electrical connectors of the solenoid.
Use a 10 mm socket to remove the intake solenoid.
Wipe off the dripping oil around the mounting hole; apply clean oil to the rubber O-ring on the top of the solenoid.
Install the solenoid valve.
caution
Use an air hose or vacuum cleaner and paint brush to clean the dust and debris around the solenoid valve.
The throttle body must be cleaned before installation, otherwise, the P0010 code will remain.
P0014 P0011 could be caused by the valve timing need be adjusted, it also need adjust timing not only replace Solenoids.
NOTICE
This is Not Genuine Auto Part. This is Aftermarket Part Manufactured by Hisport, Exceeds the Original Design, and Carries a 12 Month Warranty
Please Use the VIN to Obtain the Original Part (OE) No. to Make Sure This is The Right Part for Your Vehicle. OE Number Provided in This Listing is 100% Correct
If in Doubt, Please Send Us Your VIN, We Will Check it and reply you ASAP. Plz Make Sure Parts Purchased Here are the RIGHT Parts
Audited Supplier 
){kind=link}